The Titan 2000 boasts more features than many other detectors that cost much more money. An advanced micro-processor allows this detector to utilize “notch discrimination,” “four-tone audio discrimination” and an “automatic ground balancing system” that will allow you to operate on all types of soil with outstanding results in each! It also features nine zone programmable visual target identification settings that enable you to find treasure as soon as you take this detector out of the box!
The large LCD screen will display a target identification and visual depth readout in 1” increments as far down as 8”. An instant target discrimination control, notch mode control, low battery warning, sensitivity level control, and power on and off buttons are only a touch away on the large, easy-to-read control box.
This detector is as simple as “A – B – C” to use! Scan the ground with your searchcoil, when the coil goes over a target the detector will give you: A. an Audio Target Identification sound. B. Arrows on the right side of the meter to indicate the probable target zone. And C. an estimated “Depth Scale” on the left side of the meter to tell you how far down to dig! Dig your target and continue to scan.
